[Elecraft] Audio Out...

[Matt Maguire]

I use a mixer to manage the audio from my radios too, phones jack works well. One mixer output mixer goes to a set of headphones and the other output to a set of powered monitor speakers. The outputs each have their own master volume control, so I can have the audio coming out the speakers, the headphones, or both.
I forget how I put audio into the radios (I'm mostly CW, and I just use an audio switch box to direct the paddles/key to the right radio). I think maybe I hooked up a mic and a PC up to one of the input strips on the mixer, and take the audio out the back of the input strip towards my main radio; for the other radios I use a hand mike where needed.
73, Matt VK2RQ




On Sun, Jun 28, 2015 at 6:30 AM -0700, "evetsmd" <evetsmd at gmail.com> wrote:










With 4 radios and a computer at the operating position, you can only have
so many speakers before
it gets out of control...
I have an audio mixer that lets me control the inputs and the feed a single
amplified set of studio monitors.

I'd like to connect the K3 thru the mixer....line out to mixer seems to
work but I'd like to keep line in/out
for the digital modes......anyone have thoughts about using the speaker out
jack or phone jack for this approach...

or if you've taken a different approach or seen an article about doing
this, I'd appreciate hearing about it!

Thanks for the help....

Steve
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to matt.vk2rq at gmail.com