[Elecraft] K3: was not able to update firmware using a directory different from the default directory

[Dick Dievendorff]

Hoop:

This has been fixed. Thanks for bringing this to our attention!

FTP directory /K3/firmware at ftp.elecraft.com

06/26/2015 07:55PM        672,608 DTBL0014.HEX
06/26/2015 07:55PM        217,917 HAUX0283.HEX
06/26/2015 07:55PM        223,376 HDSP0283.HEX
06/26/2015 07:55PM            552 K3UtilityVersionInfo.txt
06/24/2015 10:21PM      Directory archive
06/24/2015 10:19PM      Directory beta
06/26/2015 07:55PM        126,385 hfpf0122.hex
06/26/2015 07:55PM        343,652 hfwnotes.rtf
06/26/2015 07:55PM        368,791 hmcu0529.hex
06/26/2015 07:55PM        368,791 hmcu0529b.hex
06/26/2015 07:55PM          4,266 tboot8.hex

73 de Dick, K6KR

-----Original Message-----
From: Jim Hooper [mailto:k9qjs at icloud.com] 
Sent: Friday, June 26, 2015 10:52 AM
To: Dick Dievendorff
Cc: elecraft
Subject: Re: [Elecraft] K3: was not able to update firmware using a directory different from the default directory

Dick, 

Yes, thanks.   “tboot.hex” was missing.   I had used the K3 Utility to “Copy New Files from Elecraft” so I am thinking that the tboot.hex file was not included in the files copied from Elecraft into the new director.   ??? 

Hoop



On Jun 26, 2015, at 10:27 , Dick Dievendorff <dick at elecraft.com> wrote:

There is a tiny boot and dtbl file missing. The list is in k3 utility help under troubleshooting missing files.

In general, I'd advise taking the whole zip file, rather than picking and choosing individual files. The files have non obvious interdependencies, MCU to FPF and DSP, and DSP to tboot and dtbl files.

The DVR firmware is factory supplied, not changeable through the utility.





> On Jun 26, 2015, at 10:18, Guy Olinger K2AV <k2av.guy at gmail.com> wrote:
> 
> DVR firmware hasn't changed in long long time. DVRs have come from 
> factory with latest for long long time.
> 
> 73, Guy K2AV
> 
>> On Friday, June 26, 2015, Jim Hooper <k9qjs at icloud.com> wrote:
>> 
>> I got an error message “One or more required firmware files is missing”
>> when running the K3 Utility, even after I “Copy new files from Elecraft”.
>> I created a new folder:  /Elecraft/K3 Firmware/K3fw5r29   but I was not
>> able not able to “Send new firmware to the K3”.
>> 
>> Then I changed to the default folder, got new firmware from the 
>> Elecraft site, and “Send new firmware to K3” was successful.
>> 
>> Current status is that 5.29 firmware has been successfully loaded using
>> the Default directory.   So no problem here.
>> 
>> But still, why was I not able to use the folder I had selected.   ?
>> 
>> Thanks, 73, Hoop K9QJS   …
>> 
>> 
>> K3 Utility MAC is 1.14.10.24
>> 
>> Currently installed in K3 is:
>> 
>> MCU 5.14
>> FPF 1.19
>> DSP1 2.83
>> DSP2 N/A
>> DVR 1.03
>> 
>> Available in folder
>> 
>> MCU 5.29
>> FPF 1.22
>> DSP1 2.83
>> DSP2 2.83
>> [Appear to be missing available software for DVR]
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net <javascript:;>
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> k2av.guy at gmail.com <javascript:;>
> 
> 
> 
> --
> Sent via Gmail Mobile on my iPhone
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> dick at elecraft.com