[Elecraft] PX3 / KX3 USB Problem

[Paul Saffren N6HZ]

Hi James, 


Please excuse me if I am stating the obvious or am suggesting something you
have already tried. 

1) Make sure that the PC is plugged into the "ACC1/PC" jack on the PX3 and
that the KX3 is plugged into the "XCVR" jack.   BE sure that the plugs are
pushed in all the way.  Those 3.5mm jacks can appear to be pushed in when
they are not. 

2) On your PC ensure that there is only one program up and running that is
using that serial port. 
3) Verify that the KX3 is set to 38,400 and the PX3 is also at 38,400. (I
think you mentioned you did this)

If that doesn't work, connect the PX3 by itself to the computer via the
ACC1/PC jack and make sure you can talk to it with your computer while using
the PX3 Utility.  

-Paul




--
View this message in context: http://elecraft.365791.n2.nabble.com/PX3-KX3-USB-Problem-tp7604295p7604317.html
Sent from the Elecraft mailing list archive at Nabble.com.