[Elecraft] K3 Reports of intermit bad audio

[Scott Manthe]

Gerald posted the reason a few posts down, Olli.

73,
Scott N9AA

On 6/24/15 1:28 AM, KC6CNN wrote:
> Howard told me that if I removed the
> fans and circuit breaker panel off of the back side I would be able to see
> where the amp connected in. Howard e-mailed me two pictures one the correct
> way and the other was one they had found the caused a similar problem. I
> pulled the plate off of my radio and sure enough the amplifier was not
> seated all the way down in the connector. I pushed down on the amp board and
> it seated completely with the connecting board. I then loosened all the
> screws on both the board and the amp and made sure they were seated and then
> retightened the screws. My K3 is now functioning great.


On 6/24/15 1:29 PM, Oliver Dröse wrote:
> And what was the reason of your bad audio?
>
> That might be even more interesting for some readers ... ;-)
>
> 73, Olli
>
> Contest, DX & radio projects: http://www.dh8bqa.de
>
>