[Elecraft] K3 - TX Gain Calibration Issue

[Wayne Burdick]

Hi Brian,

We'll look into this right away. I've copied your message to our PC software applications engineer.

Wayne
N6KR


On Jun 21, 2015, at 5:44 AM, "Brian Linn" <brian at brianlinn.com> wrote:

> All:
> 
> 
> 
> When attempting to run the TX Gain Calibration with the latest K3 utility,
> post installing the latest firmware, the message back is that the KPA3 and
> PA PWR settings are incorrect and must be set a certain way in order for it
> to run. The problem is that the settings are exactly as the message states
> they should be. (I ended up running the calibration manually.)
> 
> 
> 
> Has anyone seen this oddity?
> 
> 
> 
> Brian KD0HII
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com