[Elecraft] K1 slightly frequency shift

[Don Wilhelm]

Harry,

Make certain L1 is mounted properly.  Something is apparently moving in 
relationship to the L1 winding and causing the coupling to change.

73,
Don W3FPR

On 6/18/2015 5:09 AM, Harry via Elecraft wrote:
>   Hello
>
> since a week I am also very happy owner of a K1 with the 4 band module, atu and nb board.
>
> The rx is amazing, but I notice a slight shift of the vfo if I am put my hand on the top cover of the K1.
> I notice this shift, about 100 hz, also after a longer warm up periode. Even when I put one or two fingers above the vfo dial.
> Any hints to reduce this little frequency shift?
>