[Elecraft] K3 Sub button

[ayoshida]

Dick

Ooops.....I missed this note.
I appreciate your suggestion. Thanks

73 de aki
ja1nlx

-----Original Message----- 
From: Dick Dievendorff 
Sent: Friday, June 19, 2015 12:00 PM 
To: 'ayoshida' ; elecraft at mailman.qth.net 
Subject: RE: [Elecraft] K3 Sub button 

Check the firmware release notes:

CU 5.10 / DSP 2.83, 2-2-2015

* EASIER DIVERSITY RECEIVE SELECTION: A regular hold of SUB now goes
directly into diversity receive, without first having to go through "LINK".
This should benefit most users of the KRX3 sub receiver, since few use the
VFO linking function. Those who do use VFO linking can still turn it on by
setting CONFIG:VFO LNK to ON. This menu entry can be assigned to a
programmable function switch for easy selection if desired, eliminating the
need to bring up the menu. Note: Remote-control command "LN" is another way
to accomplish VFO linking.

73 de Dick, K6KR


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
ayoshida
Sent: Thursday, June 18, 2015 19:47 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Sub button

K3 FW 05.14

I do not know when it started this problem, however short holding and long
holding Sub button always initiate Diversity mode. I tried SWH48; command
with same result.
So I can not initiate Link/Unlink.  Any idea ?


73 de aki
ja1nlx
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com