[Elecraft] k3 switching supply

[Gary Gregory]

Scott,

On the contrary, I have had two of these units since they were first
introduced to the market and I have used other operators units as well, all
without any issues at all and there have been numerous comments on the
reflector that have reflected this same experience.

I have only used my pair with both the K3 and KX3 and at no time have I had
any issues with noise from these units.

Previously I have had several switch mode supplies and they all introduced
noise at some point, unlike my experience with the SS30 units. Neither of
mine have the LED display.

Regards,
Gary

On 16 June 2015 at 15:22, NE9U - Jasper <skjasper at att.net> wrote:

>
> I was about to order a switching supply for portable/dxpedition use and
> thought the one on elecraft site must be a good one, but i see it is
> getting poor reviews on eham.net for RFI/noise generation issues.
>
> anyone have suggestions for a good quiet k3 switching supply?
>
> scott  ne9u
>
>
> Sent from Republic Wireless Cray-1
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to vk1zzgary at gmail.com
>



-- 



*Gary - VK1ZZ, K3NHLSkype: Gary.VK1ZZhttp://www.qsl.net/vk1zz
<http://www.qsl.net/vk1zz>Motorhome Portable*
*Miss Behavin'*


*Elecraft K3KPA500FT  #18KAT500FT  #007*