[Elecraft] K3 VFO Tuning Noise

[ok1rp]

Dave,

I remember that encoder tunning noise as same as birdies has been discussed
long time ago already. 

First of all regarding the birdies (if it is Your case also) check if all
screws inside the radio (modules which you had to remove for the new synths
installation) as same as the covers etc. are tightened enough. It was not my
case, but I remember that lot of folks reported that after checking that mni
birdies disappeared. (grounding, shielding etc.)

Also You can try to set SIG RMV function in CONFIG menu. See page 59 of the
manual...

Regarding the tunning noise (if I remember well but I am not sure) there was
some additional item in the menu to reduce this encoder noise so You can
check if it is ON and if it will help...

Sorry if it is not so helpful.

73 - Petr, OK1RP
K3 #778



--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-VFO-Tuning-Noise-tp7603999p7604015.html
Sent from the Elecraft mailing list archive at Nabble.com.