[Elecraft] Keying K3 voice keyer with N3FJP

[Tom Schaefer]

Cat1ASC is N1MM's prefix to send ASCII data to radio 1 if I recall. The K3 command part would be SWT21; in that command. I did not confirm that is the button press for 1. 

In different software, you need to see what command tells the logging software to send to the radio 1 port. For example, in TR4W, the command would be SRS1=SWT21; so different programs have different ways to send commands to the radio but the radio command part remains the same. 

Again, just using your SWT21 as an example. 


Regards 

Tom NY4I 
Principal Solutions Architect
Better Software Solutions, Inc. 
727-437-2771

> On Jun 14, 2015, at 5:06 PM, Ron Wetjen <wd4ahz at gte.net> wrote:
> 
> Setting up N3FJP 4.7 for Field Day in a couple weeks.
> 
> We'll be using K3s, and am trying to get the software to fire off the M1 - M4 voice messages with the Function Keys.
> 
> I've got it working with N1MM using the
> 
> {CAT1ASC SWT21;} etc commands.
> 
> I "thought" I had it working at one time with N3FJP, using the command string CAT1ASC SWT21; but doesn't seem to be working now.
> 
> Does anyone know the correct command string or what other setting I might be missing?  I'm using the Radio control COM Port.
> 
> Thanks, Ron
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to toms at xmission.com