[Elecraft] KX-3 2 Meters, No power output

David Anderson gm4jjj at yahoo.co.uk
Sat Jun 13 04:14:07 EDT 2015


Bill, 

I have noticed your postings on this matter for sometime and am surprised that nobody has replied (at least publicly). Unfortunately I do not have the internal 2m transverter for my KX3 so cannot  help you. It does sound like a hardware problem doesn't it? Not having installed one, I am unaware of the complexities and if there are any particular points to watch out for.

Have you attempted to contact Elecraft support directly either by email or telephone? I hear that they are excellent and would be able to guide you better.

There were a number of beta testers of the 2m module, I am surprised none of them has chipped in with a little help.  Can anyone help Bill?

Hope that you get this resolved and do let us know the solution.


73

David Anderson GM4JJJ 

> On 13 Jun 2015, at 06:51, BillP <b.bill.p at gmail.com> wrote:
> 
> KX-3 Serial number 2517
> Internal or external battery power, same condition.
> HF SSB/CW/Digital operation is Fine 
> 
> No 2 meter RF output on any mode.
> I've carefully followed the 2 meter module installation instructions and firmware settings, loaded the latest software as of Friday AM (and again) and cannot measure 2 meter RF at the SMA connector using verified coax and VHF SWR bridge. The power control displays 3 watts but the 'tune' mode displays .1 watt (?).    CW, FM, SSB RF does not register on the VHF SWR/Power meter (10 watt setting) however I can hear my CW/FM/SSB signal in a nearby receiver.  Receive works fine and all modes on HF work fine.  I'm anxious to get this going for the VHF contest.  
> 
> Bill K6ACJ
> 
> Sent from my iPad
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gm4jjj at yahoo.co.uk


More information about the Elecraft mailing list