[Elecraft] Fwd: KAT500 Utility Question: Idle Sleep
James Bennett
w6jhb at me.com
Tue Jun 9 18:34:54 EDT 2015
Case closed!
> Begin forwarded message:
>
> Subject: Re: [Elecraft] KAT500 Utility Question: Idle Sleep
> From: James Bennett <w6jhb at me.com>
> Date: Tuesday, June 9, 2015 at 1:37:06 PM PDT
> Cc: Elecraft Reflector Reflector <elecraft at mailman.qth.net>
> To: Dick Dievendorff <dick at elecraft.com>
>
> Hi Dick,
>
> Nope, using a Rig Runner 4008. The K3 goes to one PP port and the KAT500 goes to a separate port.
>
> HOWEVER - the culprit has been found!!! When I just now squeezed in between the wall and my desk where the Rig Runner is mounted (making sure the cables went where I said they did) I noticed the PP plug for the KAT500 was not fully seated. I pushed it in all the way and tried the tuner power button - bingo! It powered up.
>
> While I am a fan of PowerPoles, I do think they could have been engineered a bit better to keep the plugs in place in an installation like mine, where the plugs go in horizontally; any amount of extra cable weight on the plug appears to have the effect of the plugs not being 100% seated.
>
> Well, thanks for your assistance - now I can use the KAT500 with the KX3 again w/o futzing around with the K3 first!!!
>
> 73, Jim
> an/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft>
>> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
>> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
>>
>> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
>> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> Message
>> delivered to dick at elecraft.com <mailto:dick at elecraft.com>
More information about the Elecraft
mailing list