[Elecraft] K3-P3 SSB spectrum

[Fred Jensen]

Thanks to all who replied.  I now know that the new "feature" is time 
domain only which doesn't help me.  I tried unplugging the RS-232 cable, 
and apparently the phase of the moon is not quite right because I really 
don't see much.  I tried running up the gain [SCALE] to no avail, 
brought the noise up too.

I think I'll have a QSO with a local with a P3 and he can do a screen 
capture and send it to me.

Thanks again,

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
- www.cqp.org

On 6/7/2015 2:04 PM, GRANT YOUNGMAN wrote:
> The new P3TXMON does not include transmit spectrum monitoring.
>
> Although I’ve never tried it, if you unplug the P3 from the K3, you
> can/might observe your transmit spectrum.  But this isn’t a feature.
> Alan sent an email about this some time ago .. don’t have it, but you
> can probably find it in the archive.  The K3 does not normally
> provide a transmit spectrum output.  There’s only transmit IF
> “leakage”, which varies by K3, the time of day, phase of the moon,
> lottery numbers  … so it wouldn’t be consistent enough to have a
> documented “feature”.