[Elecraft] K3 Line-Out help needed

[Michael Aust]

My Line-Out level on my K3 was too low, was Set to level of 010
had to increase higher to make things work to level > 022
Thanks.
73 Mike

--------------------------------------------
On Sun, 6/7/15, Ed Muns <ed at w0yk.com> wrote:

 Subject: Re: [Elecraft] K3 Line-Out help needed
 To: "Michael Aust" <ava622 at verizon.net>
 Cc: elecraft at mailman.qth.net
 Date: Sunday, June 7, 2015, 6:39 AM
 
 What level is LIN OUT set
 to in the CONFIG menu?73,Ed
 W0YKOn Jun 6,
 2015 10:33 PM, Michael Aust <ava622 at verizon.net>
 wrote:
 Have an Elecraft K3 here.When I try to get Audio
 from the Line-Out for CW, to feed into a computer, I
 get no Audio Out, tried Mono and Stereo Outputson my K3.
 
 Do I need to turn something on in the K3 Menu ??
 
 If I plug into front Headphone Jack on K3, it works.
 
 I need a independent Audio Line-Out that is nottied to the
 front panel volume control.
 
 Thanks in advance.
 
 SN# >8000 Firmware 5.14
 
 Mike 
 ______________________________________________________________
 
 Elecraft mailing list
 
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 
 Help: http://mailman.qth.net/mmfaq.htm
 
 Post: mailto:Elecraft at mailman.qth.net
 This list hosted by: http://www.qsl.net
 
 Please help support this email list:
 http://www.qsl.net/donate.html
 
 Message delivered to ed at w0yk.com