[Elecraft] K3: FW 5.26 an TUN PWR problem K3/100 #727

[Alexandr Kobranov]

Hi,
just shortly testet FW 5.26 on my old K3/100 #727 and having problem 
with TUN PWR - when set to 10W there is no power (or 1 - 2W) after TUN 
activated (holding button) and then no SWR indication, COMP/ALC disp 
blinking. Tried 14W and also the same. (to avoid differencies in the 
10W/100W PA mode).
When I tried to move PWR level by knob then it was jumping to correct 
level and next try was ok.
I made a PWR calibration (5W and 50W) and it was the same.

Step back to 5.14 was solution and again it is working OK.

Any similar experience? I was not able to test for longer time and check 
all possible dependencies :-(

73!
Lexa, ok1dst