[Elecraft] K3 Line-Out help needed

[Cady, Fred]

Hi Mike,
Check the CONFIG:LIN OUT value.  It should be about 10 or so.  When you are in that menu tap the 1 key to make sure it isn’t =Phones.
Good luck.
73,
Fred KE7X

Author of:
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 – Going for the summit"
“The Elecraft KPA500 and KAT500 – the K-Line Dream Station”
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
KAT500 and KXPA500 Tuner Operation
http://www.ke7x.com/home/kat500-and-kxpa100-tuners
and brand new
“The Elecraft KXPA100, PX3 and 2M/4M Transverters – Assembling the KX3-Line Station” available at www.lulu.com.

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Michael Aust
Sent: Saturday, June 06, 2015 11:34 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Line-Out help needed

Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3.
Do I need to turn something on in the K3 Menu ??
If I plug into front Headphone Jack on K3, it works.
I need a independent Audio Line-Out that is nottied to the front panel volume control.
Thanks in advance.
SN# >8000 Firmware 5.14
Mike 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to fcady at ece.montana.edu