[Elecraft] update on my KXV3B

[Sebastian]

You need to set PREAMP2 to on by holding down MENU/CONFIG.  Then press the PRE button and it will rotate from OFF to PRE 1, then to PRE 2.

This needs to be done 3 times, if you desire, for 6, 10 and 12 meters.

73 de Sebastian, W4AS

> On Jun 6, 2015, at 6:35 PM, Dick Hanson <dick at dkHanson.com> wrote:
> 
> First of all, thanks to all for responding!
> 
> 
> 
> The good news, fwiw, is that I was able to toggle to the B configuration by
> following  Bob's suggestion of going to the KXV3 menu and then pressing 9.
> 
> It switched to the new configuration and no more err.
> 
> 
> 
> When I press PRE, it now briefly displays PRE 1, which is new to my radio.
> 
> Have not yet been successful bringing up pre 2.
> 
> 
> 
> And of course, after plugging my trusty serial to usb cable..it seems to
> have quit, at a very inopportune time.
> 
> Been that kind of day, but, I'll find another cable and go for 5.26.
> 
> 
> 
> Thanks again.
> 
> 
> 
> 73
> 
> Dick, K5AND