[Elecraft] P3 vs SDR-IQ

[John Kramer]

Eric

Thanks for that info, I would like to try that out - I must have missed that in the manual….unless it was 
incorporated in the new firmware, and I didn’t see it in the release notes. 
Thanks for the heads up

73
John, ZS5J






On 31 Jul 2015, at 9:20 PM, Eric Swartz - WA6HHQ, Elecraft <eric at elecraft.com> wrote:

One minor note:  There are three different P3 and PX3 fix mode tuning defaults you can select in the menu for when you tune past the edge of the display: slide, 1/2 screen and full screen jump.

I generally prefer the slide mode as it is less jarring and drags the window incrementally in the direction you are tuning.

73,

Eric
/elecraft.com/

On 7/31/2015 12:00 PM, dmb at lightstream.net wrote:
> Hello John,
> 
>> Phil
>> 
>> So….you’re okay using “fixed tune� where your VFO window moves
>> off-centre, and heads off
>> towards the edge of the screen - at this point you can’t see whats ahead
>> of you because you’re
>> near the edge of the pan adapter. If you go any further, you fall off the
>> edge, and it plonks you back
>> in the centre, the waterfall refreshes, and you lose your waterfall
>> history. That’s okay ?
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jkramer at iafrica.com