[Elecraft] (K3S) Transferring configuration from K3

[Terry Schieler]

Thanks to all who responded directly.  I just knew there was a catch.  Calibrations are saved by the K3 Utility and those calibrations (as well as some other specific settings) are not to be transferred to a different K3 or K3S.  So, don't try this at home, kids.

73,

Terry, W0FM



-----Original Message-----
From: Terry Schieler [mailto:w0fm at swbell.net] 
Sent: Friday, July 31, 2015 11:04 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] (K3S) Transferring configuration from K3

Elecraft has advised me that my new K3S will be shipping in several days.  I believe I recall some comments here regarding saving my current K3 configuration to the K3 Utility in order to transfer it to the new K3S.  Seems like the suggestion some time back was to change the serial number in the K3 configuration to the serial number of the new K3S then upload that saved configuration to the K3S.  That seems straight forward enough.  But wasn't there some kind of disclaimer comment regarding what would and would not transfer.  Can anyone please clarify this for me.  Thanks.
 
73,
 
Terry, W0FM