[Elecraft] [OT} Running a KX3 station from a holiday trailer

Al Sather apsather at shaw.ca
Fri Jul 31 13:07:46 EDT 2015


I should also add that I have approximately a 10 foot run of #8 wire 
running from the batteries to the inside of the trailer, hoping I would 
not have a significant voltage drop. This will terminate with a PP 
distribution block. Total wire run should be less than 16 feet and 
closer to 12 feet.
Al

On 7/31/2015 9:49 AM, Bill wrote:
> The issue from running direct to battery is voltage drop to your 
> KX100.  You need 13.8v minimum to get full power out of the KX100.  I 
> run my KX3 and 857D out of a class B Sprinter and have had to resort 
> to a power supply run from shore power (or my Honda 2KW) generator to 
> get really clean power at adequate voltage levels.  I have a direct 
> line from my PP distribution block to my batteries, but the batteries 
> will not power either rig at full output power.
>
> Bill  k4yjj
>
> On Fri, Jul 31, 2015 at 12:35 PM, Al Sather <apsather at shaw.ca 
> <mailto:apsather at shaw.ca>> wrote:
>
>     Greetings
>
>     I know this is a bit of topic but I this this list has the
>     expertise to give me good answers.
>
>     My station is a KX3-KXPA100 with a PX3. I have a quiet, to me, 30
>     amp switching power and a 2000 watt Honda generator that generates
>     some, but not objectionable noise. The NB on the KX3 clears that
>     up totally. I also have a 20 amp liner Astron power supply but it
>     is heavy, bulky for use in a small trailer. And, it may be light
>     for running an amp.
>     I course I do not need to run it at 100 watts, either.
>
>     I am trying to decide if it best to operate from the trailer's AC
>     or directly from the batteries.
>     And, if I use the batteries alone are there precautions I need to
>     take.
>
>     Of course, if available I would use "shore power". The AC from the
>     trailer seems to be adequate when running with or without "shore
>     power" or with my generator.
>
>     I guess my real concern is the issue of using DC directly, and
>     what should happen for protecton between my batteries and station.
>
>     73, Al ve7ear
>     ______________________________________________________________
>     Elecraft mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/elecraft
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:Elecraft at mailman.qth.net
>     <mailto:Elecraft at mailman.qth.net>
>
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
>     Message delivered to bcobb10b at gmail.com <mailto:bcobb10b at gmail.com>
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 2015.0.6086 / Virus Database: 4392/10345 - Release Date: 07/31/15
>



More information about the Elecraft mailing list