[Elecraft] KPA-100 with K3?

[paul hippenmeyer]

Frank,

I use the KPA100 with my KX3 and my K2 and it works fine. I replaced the 
MCU of the KPA100 with a PIC16F876A with my own firmware. The KPA100 is 
controlled now via its serial port (homemade communication protocol) by 
PC or an homemade interface (display and controller with serial port). 
Hardware changes in KPA100 are minimal.

But, in all not so easy as it may sound. I aree with Don W3FPR and 
recommend a KXPA100.

73, paul
hb9axl