[Elecraft] 200 Hz 5-pole filter

[Joe Subich, W4TV]

On 2015-07-25 2:04 PM, XE3/K5ENS via Elecraft wrote:
 > Apples and oranges.

Nonsense.  The IMDDR3 of a conventional transceiver will improve
significantly if one turns on the attenuator.  Reducing overall
input to the Flex series 6 to keep the level below the ADC limit
is no different than adding an attenuator to a conventional
transceiver.

73,

    ... Joe, W4TV


On 2015-07-25 2:04 PM, XE3/K5ENS via Elecraft wrote:
> Apples and oranges.
>
> The K3 is still no 2 with the 200 Hz 5-pole filter.  You just can no longer
> buy the radio with that filter.
>
> I have always found it a little strange that Sherwood never stated that
> the filters used in his test were optional on the K3?
>
> If the K3 was tested with the stock filter it may make it into the top 10.
>
> Don't get me wrong I have a K3S on order.  I'm just looking at the data.
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/200-Hz-5-pole-filter-tp7605299p7605322.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>