[Elecraft] Access to the back of the K3

[David Cole]

Hi Bob,
When I got my K3 I decided to totally rebuild much as you did...  Desk
is movable, and uses hangers for the cabling...  

See:
http://nk7z.net/rebuilding-the-shack/

for photos of the back of the desk, not just the front...
-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net

For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Sun, 2015-07-19 at 23:40 -0400, Bob Bennett via Elecraft wrote:
> I saw the comment about the rats nest of wires we have behind out 
> equipment. Based on convention, people normally put their tables up 
> against the walls. I have my tables 18" from the walls. This gives me 
> enough room to go behind to fiddle with the wires, which I seem to do 
> every few days.
> 
> Just sharing.
> 
> Bob/nz2z
> 
> 
> 
> On 7/19/15 10:51 PM, elecraft-request at mailman.qth.net wrote:
> > Last week, I made some internal changes to the K3  and also added an
> > >>external USB data interface device for RTTY.  What's apparent is that cable
> > >>management is getting way out of control.  To gain inside access to the K3
> > >>almost requires a meditation exercise before going in.  Consider that a PR6
> > >>is mounted to the back of the K3.  The rear of the K3 is an absolute rat's
> > >>nest of cabling.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net