[Elecraft] QSK and the K3

[David Bunte]

Bill -

I have used QSK for thousands of QSOs since I got my K3 4 years ago.  I
have seen no changes at all.. but I am not a real QRQ op.  I usually run
about 28 wpm... sometimes about 32, and very rarely a bit higher than
that.  I did put in the new Synth boards, and have verified that QSK is now
silky smooth up to speeds much higher than I dare try to operate.

Best of luck getting everything to play the way you want it to.

Dave - K9FN

On Thu, Jul 16, 2015 at 10:00 AM, Bill Stravinsky via Elecraft <
elecraft at mailman.qth.net> wrote:

> When I first got my K3 in 2009 I thought the QSK was fabulous and used it
> every so often.  Then for a few years I was working too much and wasa
> little inactive.  I finally retired and heavy into ham radio once again.  I
> got the KXV3B for the preamp and had to jump from version 3 somethingmcu to
> version 5, and now have version 5.29.  Has anybody else thought the QSK  to
> be "slower"?  I am performing some tests recommended byElecraft to see if I
> have a problem but am looking for opinions from other users.
> Bill K3WJV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dpbunte at gmail.com