[Elecraft] Fw: K3 Build VFO B

[Bill Ellis via Elecraft]

--- On Tue, 7/14/15, Bill Ellis <wb9cac at yahoo.com> wrote:

> From: Bill Ellis <wb9cac at yahoo.com>
> Subject: K3 Build VFO B
> To: "WB9CAC" <wb9cac at arrl.net>, "Elecraft group" <elecraft_k3 at yahoogroups.com>
> Date: Tuesday, July 14, 2015, 4:33 PM
> Instructions say to trim 5 pins close
> to the pc board. They are quite short now. There is a little
> bit above the solder. Do they want that little bit off?
> 
> 73's
> 
> Bill Ellis, WB9CAC
>