[Elecraft] K3: Upgrade or replace

Joe Subich, W4TV lists at subich.com
Fri Jul 10 20:34:52 EDT 2015


OK, my misunderstanding ...

73,

    ... Joe, W4TV


On 2015-07-10 7:18 PM, Wayne Burdick wrote:
>> 1) modified bias in the speaker amplifier *driver* (not the amp
>>    itself) for improved linearity.
>
> The power amp itself has in fact been updated. And there's a new AF driver stage.
>
> Wayne
>
>
>> This does not affect the power
>>    output or frequency response.
>> 2) 5/10/15 dB stepping on the *main receiver* attenuator (this
>>    does not affect the KRX3 which remains at 0/10dB)
>> 3) improved isolation on the main RF board due to a change from
>>    two to four layer construction.  The difference is probably not
>>    measurable on the air.
>> 4) a change in RF output devices in the KPA3 - difference TBD.
>>
>> The other change is the KIO3B which provides the option of an
>> internal USB interface for radio control and USB CODEC ("sound
>> card").  A traditional RS-232 interface is more flexible and a
>> *high quality* external sound card or *well designed* audio
>> interface *may* provide a somewhat lower noise floor (better
>> SNR/dynamic range).  Most users will probably not notice a
>> performance boost unless they are using one of the notoriously
>> "dirty" (cheap) amateur products.
>>
>> 73,
>>
>>    ... Joe, W4TV
>>
>>
>>> On 2015-07-10 12:21 PM, Jim Brown wrote:
>>>> On Fri,7/10/2015 6:07 AM, Bill wrote:
>>>> I am not a DXer or contester - merely a rag chewer on 75 and 40.
>>>
>>> For your operating interests, the only thing I would do is upgrade to
>>> the new synth board. I consider that 90% of the difference between the
>>> K3 and K3S. I did that, and because 6M is important to me, I also bought
>>> the new KXV3B to get the new preamp. I had previously been using an
>>> outboard ARR GasFET preamp.
>>>
>>> 73, Jim K9YC
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n6kr at elecraft.com
>


More information about the Elecraft mailing list