[Elecraft] K3 KBPF3 mod for LF questions capacitor size ?

[Merv Schweigert]

Any reason why small leaded caps cannot be just be bridged across the SMTs?

Lots easier to hold the lead with a tweezer and dap a little solder on 
the end.

Merv K9FD/KH6

> They're 0603s (.06" x .03"), which would be considered "mediums size" by today's SMD standards. But it does take a bit of courage (and a good pair of tweezers, and maybe a shot of cheap whisky) to install them by hand. Hats off to our intrepid customers attempting this for the first time!
>
> 73,
> Wayne
> N6KR
>
> P.S.  Our engineers and technicians routinely work with with packages that are about 0603 size, but have *6* leads that must all be soldered. This is done by flowing solder onto all 3 pins on one side at a time (carefully!), then wicking the excess solder off with solder wick or a vacuum tool. Not for the faint of heart.
>
>
>
> On Jul 7, 2015, at 2:39 PM, <ejkkjh at gmail.com> wrote:
>
>> I don’t know but they are very small, I have seen bigger fleas....
>>
>> -----Original Message----- From: Hank P
>> Sent: Tuesday, July 07, 2015 5:32 PM
>> To: Elecraft
>> Subject: Re: [Elecraft] K3 KBPF3 mod for LF questions capacitor size ?
>>
>> Are these 0805 or 0603/0604  or even smaller  chips ?
>>
>> Hank K7HP
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9fd at flex.com
>