[Elecraft] variac question

[Tim Groat]

It sounds like a polarity problem. The line cord feeding the variac may 
be reversed, or the switch may be in the neutral instead of the 120V 
line (or if it's a double-pole switch, one pole may have failed "On".) 
Easy way to tell: check voltage from neutral to ground with the switch 
on. If it's zero when the switch is on and 120V with the switch off, the 
switch probably is in the neutral. If it's 120V both ways, the line cord 
or outlet is wired wrong.

You definitely should fix it, but don't rely on the switch for safety. 
They can (and do) fail. Always unplug to be safe!

---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com