[Elecraft] IF out of 2nd Receiver in K3?

[Edward R Cole]

Doug,

Its not difficult if you do not mind soldering a disc ceramic cap to 
the subreceiver board and running some RG-174.  I outlined how I did 
that on my webpage:
http://www.kl7uw.com/LINRAD.htm

Scroll down the page until you come to the heading:
   Connecting K3 Sub-Receiver IF to LP-Pan:
Connection is near the noise blanker jack-J78, pin1 and W3.
Just solder a .001 uF disc ceramic cap and attach other end to center 
conductor of the RG-174.
Full instructions on my website.  Use static protection while 
handling the open sub-receiver.

73, Ed - KL7UW
------------------------------------------
From: Doug Ellmore <doug at ellmore.net>
To: elecraft at mailman.qth.net
Subject: [Elecraft] IF out of 2nd Receiver in K3?
Message-ID:
         <CANAn7wwcMQpTd9qmpA+3Zj73TLEXSXjZby1VSxdy+yQsrLMK5g at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Is there a way to get the IF out of the optional 2nd receiver of a K3?

In addition to looking at two different bands in HF, I am thinking it would
be great to be able to look at both 6m and 2m for field day with one K3.


Doug NA1DX
na1dx at arrl.net
www.ellmore.net/na1dx


73, Ed - KL7UW
http://www.kl7uw.com
     "Kits made by KL7UW"
Dubus Mag business:
     dubususa at gmail.com