[Elecraft] IF out of 2nd Receiver in K3?
Tom Blahovici
tomb18 at videotron.ca
Wed Jan 28 21:20:49 EST 2015
Hi
That assumes one is using a p3. A software panadapter would work fine except that there would no way to get the if shift from the sub since that command doesn't exist. It could still be done but it would be a bit of a hack.
Tom
va2fsq.com
On Jan 28, 2015 8:20 PM, Alan <n1al at sonic.net> wrote:
>
> Right, the P3 would work only in tracking mode (no fixed-tune mode) and
> the sub receiver frequency and receiver bandwidth would not display on
> the P3. Also, click-to-QSY would not work and the reference level would
> not be correct. But you can still change the span, offset the center
> frequency, change the reference level and scale, turn on the waterfall
> and averaging, adjust the markers (reading relative frequency) and use
> most of the other features.
>
> Alan N1AL
>
>
>
> On 01/28/2015 04:57 PM, David Gilbert wrote:
> >
> > As best I remember, though, the P3 talks only to the main receiver ...
> > right? I believe that anyone wanting to display the sub-receiver
> > would have to use a different panadapter scheme if they want
> > handshaking capability such as frequency information, point/click QSY,
> > etc.
> >
> > The N2QT modification described in the June 12 PVRC newsletter (easily
> > found via Google search) describes how to do this in better detail
> > than the reference below.
> >
> > Dave AB7E
> >
> >
> >
> > On 1/28/2015 4:43 PM, Alan wrote:
> >> There is no official Elecraft modification to access the sub-receiver
> >> IF output, but they do have some information on the web site about
> >> others have done it:
> >>
> >> http://www.elecraft.com/K3/K3FAQ.htm#sub%20rx%20if
> >>
> >> Alan N1AL
> >>
> >>
> >> On 01/28/2015 10:39 AM, Doug Ellmore wrote:
> >>> Is there a way to get the IF out of the optional 2nd receiver of a K3?
> >>>
> >>> In addition to looking at two different bands in HF, I am thinking
> >>> it would
> >>> be great to be able to look at both 6m and 2m for field day with one
> >>> K3.
> >>>
> >>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tomb18 at videotron.ca
More information about the Elecraft
mailing list