[Elecraft] IF out of 2nd Receiver in K3?

[David Gilbert]

As best I remember, though, the P3 talks only to the main receiver ... 
right?  I believe that anyone wanting to display the sub-receiver would 
have to use a different panadapter scheme if they want handshaking 
capability such as frequency information, point/click QSY, etc.

The N2QT modification described in the June 12 PVRC newsletter (easily 
found via Google search) describes how to do this in better detail than 
the reference below.

Dave   AB7E



On 1/28/2015 4:43 PM, Alan wrote:
> There is no official Elecraft modification to access the sub-receiver 
> IF output, but they do have some information on the web site about 
> others have done it:
>
> http://www.elecraft.com/K3/K3FAQ.htm#sub%20rx%20if
>
> Alan N1AL
>
>
> On 01/28/2015 10:39 AM, Doug Ellmore wrote:
>> Is there a way to get the IF out of the optional 2nd receiver of a K3?
>>
>> In addition to looking at two different bands in HF, I am thinking it 
>> would
>> be great to be able to look at both 6m and 2m for field day with one K3.
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to xdavid at cis-broadband.com
>