[Elecraft] Remote Rig RC-1216H use with KPA500

[Eric Swartz - WA6HHQ, Elecraft]

We also have free full remote control software for the KPA500 and KAT500 on our K3 Software page.

http://www.elecraft.com/k2_remote.htm#k3remote

I use these with my remote station. 

These windows programs include both the host and client programs and they provide complete access to the KPA500 and KAT500.

Also of interest is the free remote software from remotehams.com .  (The author, Brandon, works in our engineering group and we are a sponsor of his web page. ) It includes embedded Voip and control of the K3, KPA500 and antenna rotors that support the high gain serial protocol. This is the s/w I also use for my remote operation.

Eric
elecraft.com
_..._



> On Jan 26, 2015, at 9:54 PM, Barry Baines <bbaines at mac.com> wrote:
> 
> I’m wondering if anyone has an experience with Remote Rig’s RC-1216H, a web-based device to control the KPA500 (among other things).  See:  
> http://www.remoterig.com/wp/?page_id=1010#tabs-3 <http://www.remoterig.com/wp/?page_id=1010#tabs-3>
> 
> The potential benefit is being able to remotely access the KPA500’s controls as well as view forward power and SWR, but being able to do so remotely using the RC-1216H through a web browser.  
> 
> Ham Radio Outlet carries the Remote Rig product line, but they don’t carry this particular product.  Consequently, I’m also wondering what the best approach might be to obtaining one in the US.   Is there anyone in the US that carries it, or is my only option to order it directly from Sweden?
> 
> Thanks,
> 
> Barry Baines, WD4ASW
> Folkston, GA
> Westborough, MA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to elist_copy at elecraft.com