[Elecraft] TX EQ Setup for K3

[Don Wilhelm]

Mark,

TX EQ is a Main Menu setting.  Tap the MENU button then rotate the VFO B 
knob until you see TX EQ1 If it is set to some other band, tap "1").  
Rotate the VFO A knob to change the setting for band 1.
Then tap 2 to change band 2
So on for bands 3-8.

73,
Don W3FPR

On 1/27/2015 8:25 AM, pastormg2 at verizon.net wrote:
> Good Morning,
> I am looking to setup my Heil HM12 microsoft using the TX EQ. I have looked at the manual on pages 35 and 36 and it doesn't seem to be too clear as to what buttons to push to get to the TX EQ setup. I have read the different messages but it  seems it deals with a utility program that one can use for the K3.
>
> How do I set this up the old fashioned way as they say? It see a RIT and XIT button on the far right bottom side of the transceiver but that's about it. Any help would be much appreciated. Mark Griffin, KB3Z
>