[Elecraft] K3 Keyer to use with Tascam interface

[ejkkjh at gmail.com]

Chris,
I understand your question, I have been wondering the same thing.
And in spite of a couple replies you got, I think it is a good question.
If you find an answer, please let me know, and I will do the same.  I have 
tried using the K3 VOX for digital modes and I have had problems with it.
One thing I have done is use a Signalink USB on the transmit side to key the 
K3, that works well, but simpler solution might be better.
Thank you, good luck 73
Emory WM3M

-----Original Message----- 
From: Chris Meagher
Sent: Monday, January 19, 2015 11:51 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Keyer to use with Tascam interface

Hi
I have set up a Tascam US-125M with K3/10, for work with fl-digi.
Rather than use VOX, I would like to make a simple as possible circuit to
take the Tascam right channel output (carrying fl-digi keyer tone) to key
the K3 via the rear panel RCA,. Preferably electronic switching. Could use
a 9V battery?
Does anyone have a ready made circuit? Thanks.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ejkkjh at gmail.com