[Elecraft] P3 SVGA WaterFall Marker Issue

[Tighe Kuykendall]

Two more observations.

If I turn the Waterfall Marker on and have it displaying on both P3 and 
SVGA then tap the assigned button to turn the Waterfall Mark off, it 
stops displaying on the P3 but on the SVGA where the marker is 
displaying the marker stays with the VFO frequency.  If I turn the P3 
knob to move the VFO A marker the waterfall line stays centered on the 
VFO Frequency and with a knob tap to QSY the marker line remains with 
the VFO A frequency.

The MKR A frequency display in the upper left corner of the SVGA display 
disappears after a knob tap to QSY.  The marker frequency continues to 
be displayed on the P3 display.  Don't recall if it was that way before 
the upgrade.

Tighe
NK4I



On 1/17/15 6:09 PM, Tighe Kuykendall wrote:
> Just loaded the latest P3 Beta to get WaterFall Markers.  Thanks for the
> feature.
>
> But...  I noticed a curious behavior.  Using the button on my P3 which
> is programmed for WfallMkrs I noticed it's not controlling the SVGA
> marker as it does the P3 display marker.
>
> If I start with VFO A Marker off and Waterfall Marker off.  Turn on VFO
> A marker then tap the button for the Waterfall Marker.  P3 behaves
> normally.  The SVGA does not display the Waterfall Marker.  If I tap the
> MKR A button on the P3 to turn it off, then tap it again to turn the VFO
> marker back on, both the P3 and SVGA display the Waterfall Marker.  If I
> then tap the button I have programmed for WfallMkrs the P3 turns off as
> expected but the SVGA continues showing the marker.  Two taps of the MKR
> A button to turn off and then back on gets the displays in sync again.
>


-- 
Tighe Kuykendall
NK4I  |  www.NK4I.com  |  @NK4I
ARRL Life Member, NAQCC #6467, FISTS #16746, SKCC #12217