[Elecraft] P3 beta - more test results

[Paul Saffren]

Hi Andy,

Thank you for the report.  Actually the bug is simply that the external 
SVGA screen cannot be enabled after disabling.  This is a genuine bug 
and I have a fix already in place.

73,

Paul

Paul Saffren - N6HZ
Project Manager
Elecraft Inc.
831-763-4211 x122
www.elecraft.com

On 1/15/2015 1:32 PM, ANDY NEHAN wrote:
>
> So I reloaded the P3 beta and went thru some tests as follows to try 
> to reproduce the external screen freeze:
>
>  1. took the svga option and then selected and tried each entry in
>     sequence with no problems. Did NOT try the ubmp, urst, usav as I
>     had no usb device attached.
>  2. RX data window size OK
>  3. TX data window size changed to 0 and when I did the P3 screen
>     showed a blank area under the spectrum display BUT the external
>     screen was fine (normal display). Rebooting the P3 fixed this.
>  4. Got the external screen to freeze again by adjusting the waterfall
>     function and then going into svga option and toggling external
>     display on and off. It toggled off but then froze when toggled
>     back on. Once again rebooting the P3 and all was well.
>  5. Anytime I play with waterfall colour bias and then toggle external
>     display on and off the external display freezes.
>
>
> Hope the above is of use when bug finding.
>
>
> Andy G4HUE
>