[Elecraft] K3/0 all in one box? + P3/0

[kb2m at arrl.net]

 Sorry for my confusion, I was thinking IQ as the usable form of IF at the
control site, not the raw 8 mHz IF. My idea would be to somehow get the IQ
output from a LP-Pan or similar device, add another box on either end to
send and receive the IQ data, then simply use the control stations computer
soundcard and run your panadapter software of choice. Only problem here is I
don't have a clue on what to use for the remoting of the IQ output from the
LP-Pan...
 All this non-portable, not suited for hotel room use would work for me as I
will be at a desktop computer for 6 months or so while remoting from my
summer home.
 And of course to not stray from the original topic, it would be nice to
have the control station use a P3 with the extra data lines intergraded into
the 1258, or K3/0 mini mark II  :-).
 

73 Jeff kb2m 

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Fred
Jensen
Sent: Tuesday, January 13, 2015 19:59 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3/0 all in one box? + P3/0

Hmmm ... K3 1st IF is ~8 MHz.  Could pose some problems for generally
available "<something>overIP" for many people.  I/Q sounds like a better way
to go with a PX3?  I guess that would require an outboard quadrature demod
at the "real" K3.

While I don't do remote stuff right now, we're eventually going to have to
sell our 5 ac and move to a 1-story house, probably with CC&R's. 
Consequently, remote operation may be a part of my future.  Since I got the
P3, it is the almost total focus of my concentration when operating ... I
would hate to lose the functionality.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
- www.cqp.org

On 1/13/2015 3:27 PM, Harry Yingst via Elecraft wrote:
> When you stop and think about it I really wonder if they could make a
> P3/0 For the most part much of the P3 screen does not change at any 
> given moment.so if they only send the changes I would venture to say 
> that much of it could besent over the wire much as we now send Voice 
> Over IP. Using the current chips for multimedia and possible some of 
> the open source CODEXsit may be a workable item, though I would expect 
> it to me a bit off a pricey option

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to kb2m at arrl.net