[Elecraft] K3/0 all in one box? + P3/0

[Walter Underwood]

It might make more sense to mix the IF down to baseband I/Q, bring the audio back, then run a remote PX3. It would need a high-bandwidth audio connection, though, probably with lossless compression.

wunder
K6WRU
CM87wj
http://observer.wunderwood.org/

On Jan 13, 2015, at 3:27 PM, Harry Yingst via Elecraft <elecraft at mailman.qth.net> wrote:

> When you stop and think about it I really wonder if they could make a P3/0
> For the most part much of the P3 screen does not change at any given moment.so if they only send the changes I would venture to say that much of it could besent over the wire much as we now send Voice Over IP.
> Using the current chips for multimedia and possible some of the open source CODEXsit may be a workable item, though I would expect it to me a bit off a pricey option
> 
> 
> 
> 
> 
> 
> 
>    From: "kb2m at arrl.net" <kb2m at arrl.net>
> To: 'Elecraft Reflector' <elecraft at mailman.qth.net> 
> Sent: Tuesday, January 13, 2015 5:27 PM
> Subject: Re: [Elecraft] K3/0 all in one box?
> 
> I already own a K3/0 mini, RRC-1258, power supply, etc. I would sell all of this and buy a K3/0 mini, and remote box as you describe, 'IF' it had an IF out at the control end of the station. I really don't think this would be real hard for Elecraft to do, but the market would have to dictate... What do you think Wayne :-)
> 
> 73 Jeff kb2m
> 
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Harry Yingst via Elecraft
> Sent: Tuesday, January 13, 2015 15:44 PM
> To: Elecraft Reflector
> Subject: [Elecraft] K3/0 all in one box?
> 
> About a year ago I had strongly considered getting the full size K3/0and putting the RemoteRig inside so it would be self contained.
> Now with the K3/0 Mini it got me thinking that a nice accessory would be a box thatwould hold the Remote Rig, a small power supply and possibly a wireless adapter.That way the K3/0 Mini would just mount to the front making it one unit.
> My thoughts being that it would only take a walloutlet and an Ethernet connection to be on the air.
> Has Elecraft considered such an option?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message delivered to kb2m at arrl.net
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hlyingst at yahoo.com
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org