[Elecraft] K3 Drift

[Harry Yingst via Elecraft]

Yes it is good
I never really had and issues even when I was using the stock oscillator and running JT-65 
I went to the High Stability and a GPSDO because I'm of German Decent ;)




      From: KD7PY <emoss98133 at msn.com>
 To: elecraft at mailman.qth.net 
 Sent: Tuesday, January 13, 2015 4:52 PM
 Subject: Re: [Elecraft] K3 Drift
   
I just did a freq. calibration of my K3.
with the dial set to 9.999.000 in usb for wwv at 10 mhz, that gave me a 1
khz tone that I sent to the computer using Spectran that will show the freq
of the audio. I was able to set thr REF CAL in the K3 to be within .03 cycle
of dead beat. I calibrated my Xtal reference osc dead beat with wwv. and
then set the K3 to 6 meters , dial set to 49.999.000 to give a 1 khz tone
and checked the 5 harmonic of the xtal osc. and found that the K3 was only
off 8.68 cycles.  due to the fact I was using the 5th harmonic of the xtal
osc there is some small error. I did a freq drift check before doing the
above and found my K3 had a drift of only 8.5 cycles over a 2 hour warm
up.....

to me this is darn good...

Ed  KD7PY (ex K7WIA)




--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-Drift-tp7597035p7597073.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com