[Elecraft] K-3

[Phil Anderson]

Bob, I second all the suggestions. Particularly, having just built a K3 
and adding the second receiver,
one must be patient and work slowly..........in order to not overlook 
slight things that matter.
I suggest that you read each step, think about it, and then read it 
again as you complete it. Be ready to
ask yourself the question, "what does that abbreviation" say or 
mean....then use the manual to look up
each bit a jargon you're now seen or don't remember about. Then go back 
and read the step again and proceed.
Slow and careful - and enjoy the process - results in a working unit.

Have a super day. Phil, W0XI, K3 and P3 owner.

> Bob Gibson via Elecraft <mailto:elecraft at mailman.qth.net>
> Monday, January 12, 2015 7:19 PM
>  HI All..I just bought a used K-3, I wanted to install the antenna 
> tuner and 2.8 SSB filter as well as the 6 KC SSB filter.. I have never 
> looked inside the K-3 so..is this going to be a hard job to do?Bob 
> W5RG  Almost 60 years in Ham Radio
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to aldenmcduffie at sunflower.com


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com