[Elecraft] K3/0 mini remote, panadapter display at control site

[Don Wilhelm]

Jeff,

I have heard of some who are using a webcam at the remote site to view 
the P3.

I am not certain how you would pass any RF signal (and the IF output is 
RF at 8 MHz) from the remote to the control site without using a direct 
coax run.

I guess it *might* be possible to transmit the internal digital 
information that represents the P3 display over the communications link 
between the remote site and the control site, but I know of no current 
hardware to do that.

73,
Don W3FPR

On 1/11/2015 8:23 AM, kb2m at arrl.net wrote:
> I know several people are working on getting the IF from the remote K3 to
> the K3/0 control site. Has anyone got this working, and would like to share
> their method with the group? Is it possible for Elecraft to add forwarding
> of the IF with a mod to the existing hardware? I sorely miss my panadapter
> display when operating remote...
>
> 73 Jeff kb2m
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>