[Elecraft] [K3] WSJT-X settings for K3

[Gordon LaPoint]

I don't have a problem, but I let dxlabs commander talk to the radio and 
configure WSJT-X to use dxlabs.

Gordon - N1MGO


On 01/08/2015 10:13 PM, inventor61 . wrote:
> I have tried the last two versions of WSJT-X and there seems to be some
> problem with the rig control for the K3.  I get error messages, something
> about the program not being able to read the mode of the radio's second
> VFO.
>
> As is often the case, a pretty cryptic error message is what's offered,
> mostly intended for the programmer, not an end user.  I think the program
> uses hamlib for radio control options.
>
> Many attempts at different settings were tried, and the one that works best
> is to set it for no programmatic rig control, at all (other than RTS for
> PTT).
>
> I have no problem with my K3-P3-KPA500 station, or with other control
> programs, just WSJT-X.  I use only 'real' UART based COM ports, so, that's
> not the problem.
>
> Anybody experience similar?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gordon.lapoint at gmail.com