[Elecraft] K3 , Elecraft Transverter K144XV-K

[alexandr.kobranov at seznam.cz]

HI David,

so my numbers:

for 144.300MHz
0,1mW -> 2W out
1mW -> 9W 

for 146.100MHz (as I have I/F for 10GHz from 146MHz up)
0,1mW -> 1,3W
1mW -> 7W

hope You did power calibration via K3 Utility whwre is also 1mW output 
calibration
(I did ;-))

All the best and GL,
73!

Lexa, OK1DST
K3/100 #727



---------- Původní zpráva ----------
Od: David Pratt <david at g4dmp.fsnet.co.uk>
Komu: Viggo Magnus Nilsen <la9nea at online.no>
Datum: 7. 1. 2015 10:10:58
Předmět: Re: [Elecraft] K3 , Elecraft Transverter K144XV-K

"I have just measured my K144XV power output with an accurate power output 
meter and find that with the K3 set for 1mW the output is 10.5W. But setting
the K3 to 0.1mW (fully counter-clockwise) the output goes down to only about
7W. No matter what I do, I am unable to reduce the power further.

It will be interesting to see if other K144XV users find the same.

73 de David G4DMP

On 7 Jan 2015 04:20, Viggo Magnus Nilsen <la9nea at online.no> wrote:
>
> Hello K3 owners ! 
>
> Want to know the lowest power setting Elecraft internal 2 meter transv.( K
144XV-K)??, know the max out is 8 to 10 watt approx....... 
>
> My DB6NT transverters ( IF 144 MHz) need 0,5 to 5 watt ,(IF power settings
are adjustable in the DB6NT Transverter) 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to alexandr.kobranov at seznam.cz"