[Elecraft] [K3] Tascam US-322 to K3

[Don Wilhelm]

Darryl,

Digital modes normally use only the left channel, although there are 
some applications that allow you to switch it to the right.
The K3 Line In and Line Out jacks are stereo type, but there is no 
connection to the ring contact, and the audio will only appear on the 
normal left channel.
So for the purpose of data modes on the K3, there is no need to be 
concerned about channel separation.

73,
Don W3FPR

On 1/6/2015 1:25 PM, KK5IB wrote:
> I have a Tascam US-322 USB Audio Interface to connect to my K3 for digital
> use. I picked it because it has support for Windows 7/8 and 24 bit/96 KHz
> resolution. It has standard L/R in and out connections plus controls. To
> connect it to the K3, is it as simple as K3 Stereo line out to the 322
> stereo line in, and K3 Stereo line in to 322 line out, with USB cable to
> computer? I suppose it's best or correct to maintain the L/R stereo
> separation in the cables, that is using both channels. Any help or
> instructions would be appreciated.
> Darryl, KK5IB
>