[Elecraft] PR6-10/KXV3A FAILURE

[Vic Rosenthal 4X6GP/K2VCO]

If you have it connected to the AUX connector on the K3, make sure you 
have set DIGOUT1 to ON in the config menu on the bands that you want to 
activate the preamp on.

On 5 Jan 2015 19:17, STEPHEN R wrote:
> Good morning group.  I have a PR6-10 preamp which works fine on my
> main radio but doesn't work on radio number 2.  I am able to receive
> OK through the preamp using secondary antenna but the preamp does not
> work to amplify signals on 6 and 10 meters.  I know the preamp works
> fine.  Has anyone had a failure of their KXV3A interface causing
> similar problem?  Thanks and 73, Steve W0SZ


-- 
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/