[Elecraft] KX3+KXPA100+PX3 = Outta Inputs/Outputs

[David Orman]

Hi David, keep the PX3 off, turn on PA mode on the KX3, then turn on the
PX3, and see if that works. I remember running into an order-of-operations
problem like this before, worth a try at least. I don't have my setup
connected right now or I'd figure out what I was doing to make things jive.

David

On Sat, Jan 3, 2015 at 9:35 AM, David Ahrendts <davidahrendts at me.com> wrote:

> Dick, yes. As on page 9, all of the connectors are in use for the KX3, the
> PX3 and the KPXA100 per the Elecraft design. Ergo, my dilemma: where would
> a KXUSB go?
> David A., see page 9 of the PDF Dick uploaded. This is the Elecraft design
> for all ports and cables when using the KX3, the PX3 in line with the
> KXPA100.
> David O. and David A., if you’re suggesting using the ACC1 available port
> on the KXPA100 (end of the daisy chain), I have tried that, and
> unfortunately this causes a new problem: the KX3 refuses to enter the PA
> Mode with the KXUSB connected. Menu>PA Mode>On will not stick. It just
> falls back to Off.
>
> David A., KC0XT
>
>
> > On Jan 3, 2015, at 7:20 AM, Dick Dievendorff <dick at elecraft.com> wrote:
> >
> > I have it connected as shown on page 9 of the PX3 owner's manual.
> >
> > http://www.elecraft.com/manual/PX3%20Owner's%20Manual%20A2%20WEB.pdf
> >
> > 73 de Dick, K6KR
> >
> >
> >
> > -----Original Message-----
> > From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> David Anderson
> > Sent: Saturday, January 03, 2015 2:13 AM
> > To: David Ahrendts
> > Cc: Elecraft List
> > Subject: Re: [Elecraft] KX3+KXPA100+PX3 = Outta Inputs/Outputs
> >
> > Can you explain what you have connected to the ACC1 port on the KX3 at
> present?
> >
> >
> > 73
> >
> > David Anderson GM4JJJ
> >
> >> On 2 Jan 2015, at 23:13, David Ahrendts <davidahrendts at me.com> wrote:
> >>
> >> Got the KX3 Line. KAT500 and W2 also. Love ‘em. Now, I appear to be out
> of inputs and outputs with little lines running between the boxes and all
> of the inputs/outputs in use. What do you do to get a KXUSB into the KX3
> for radio control from a variety of software programs into an ACC1 PC port?
> None available. Can the ACC1 port be Y’d?
> >>
> >> David Ahrendts, KC0XT, LA
> >>
> >>
> >>
> >> David Ahrendts   davidahrendts at me.com
> >>
> >>
> >>
> >>
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net Please help support this email
> >> list: http://www.qsl.net/donate.html Message delivered to
> >> gm4jjj at yahoo.co.uk
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to davidahrendts at me.com
>
>
>
>
> David Ahrendts   davidahrendts at me.com
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ormandj at corenode.com