[Elecraft] K3 front panel encoders

[SA2CIR]

Don,

Thank you for the reply! I will follow your advice, a new encoder is now on
the way from Elecraft.

73, Rickard SA2CIR

Don Wilhelm-4 wrote
> Richard,
> 
> I don't know of any way to resurrect a failing encoder.  The fact that 
> the switch works is entirely different - the switch function is not 
> related to the rotational function of the encoder.
> 
> I would simply replace the encoder.
> 
> As far as the fact that it works for the first 10 seconds after a power 
> up is not really significant, that depends on the starting position of 
> the encoder.  If the output from the encoder does not cycle in the A to 
> B (or B to A) sequence, the control will not be smooth, even though 
> subsequent (through frustration) rotation of the encoder will produce 
> some results.
> 
> 73,
> Don W3FPR





--
View this message in context: http://elecraft.365791.n2.nabble.com/Re-K3-front-panel-encoders-tp7594936p7596631.html
Sent from the Elecraft mailing list archive at Nabble.com.