[Elecraft] K-1 rig control
alhanzl at comcast.net
alhanzl at comcast.net
Fri Feb 27 23:16:20 EST 2015
Understood.
Tnx fer all the help.
73
Al
K2AL
----- Original Message -----
From: "Rick Tavan N6XI" <rtavan at gmail.com>
To: "Al Hanzl" <alhanzl at comcast.net>
Cc: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Friday, February 27, 2015 8:31:14 PM
Subject: Re: [Elecraft] K-1 rig control
Yes, you can key the rig from a computer using N1MM and one of the well-publicized circuits to convert RS-232 signals from a computer serial port to keying levels. What people are telling you that you can't do is "rig control," meaning having the rig tell the computer what frequency it's tuned to or the computer moving the rig to another frequency. That requires an interface on the rig that is not included on the K1.
Have fun!
73,
/Rick N6XI
On Fri, Feb 27, 2015 at 10:54 AM, Al Hanzl < alhanzl at comcast.net > wrote:
Tnx
Figured.
I may be able to key the rig with CW with N1MM.
73
Al
Sent from my iPhone
On Feb 27, 2015, at 1:20 PM, Don Wilhelm < w3fpr at embarqmail.com > wrote:
> Al,
>
> The short answer is no. There is no provision on the K1 for computer communications.
> The K2 with the KIO2 or KPA100 option does have computer connection capability as does the K3 and KX3.
>
> 73,
> Don W3FPR
>
> On 2/27/2015 11:23 AM, Al Hanzl wrote:
>> Ok
>> New topic
>> I am rather new to contesting, N1MM+, rig control, etc.!
>> I have a K-1 s/n 151 which I enjoy using in contests.
>> I also have an Icom 746 which I have interfaced with my Dell laptop W8 with some success.
>> Can the K-1 be interfaced for rig control and CW contesting using N1MM+ ?
>> Tnx
>> Al
>> K2AL
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto: Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rtavan at gmail.com
--
Rick Tavan N6XI
Truckee, CA
More information about the Elecraft
mailing list