[Elecraft] KX3 as Remoterig controller - need success best known method - currently not working for me.

[Don Wilhelm]

Jim,
Seeing that you have not received any other responses --
I am talking out of my realm because I know nothing about the RemoteRig 
setup, but if RemoteRig is using RTS-CTS protocol, then you will need to 
loop-back (short) the CTS to RTS path.  The KX3 does not include RTS nor 
CTS in the connection to the serial port. I don't know about the 
RemoteRig serial communications, but I do know something about RS-232.

73,
Don W3FPR

On 2/27/2015 4:51 PM, Jim Cullum via Elecraft wrote:
> So I have seen (what I think) is every post about (possibly) using the KX3 as a Remoterig controller for the K3.  I am trying to set this up, but currently with limited success.  I need someone who has success with this and can pass along some suggestions for success.  I can only find a 2012 posting from SM0JZT where he got it to work:  https://groups.yahoo.com/neo/groups/KX3/conversations/topics/14433
> Currently with the KX3 as the controller I can only power the remote K3 on/off, none of the other limited set of features (outlined by N6KR such as VFO, mode, filter, etc) are working.
> Setup:
>