[Elecraft] Split operation

[Harry Yingst via Elecraft]

I guess I see it as we should be able to just read the screen. Maybe it's because I learned to pay attention 
to the details while in the Navy (doing push-ups because someone did not pay attention to the little details). 
You struck on the real problem.... Far to many rude people today 
I've been fortunate over the years and I've had a some fellow Hams work with me on the air (when my signal was off etc). That left me with the desire to pass along help and guidance when I could; in a nurturing not condescending manner. 
Remember it's just a hobby 









      From: Gary Smith <Gary at ka1j.com>
 To: Elecraft at mailman.qth.net 
 Sent: Tuesday, February 24, 2015 12:38 AM
 Subject: Re: [Elecraft] Split operation
   
Harry,

What you say is true, I can not disagree. 

I will say that absent-mindedness is the 
bane of humanity and nobody can remember 
all the right things to do, all of the 
time. No matter how hard we like to think 
of ourselves as doing the perfectly right 
thing, some incredibly competent person, 
somewhere, is making a mistake at this 
moment.

Since transmitting on the Dx Tx frequency 
is one of the deadly sins, creating the 
extra step to make it not happen is a good 
thing.

Just today I clicked on a RTTY spot I 
needed, tuned them in on the scope, set 
the VFO to where I wanted to transmit. All 
was good... I gave my call 4-5 times till 
some ass insulted me calling me a name, 
sending UP UP and then another 
ass-relative of theirs called me names.

I thought I was in split with the marker 
in the P3 dead on where I wanted to 
transmit. All was set except I hadn't 
dedicated that A>B button to "split".  If 
in my P3 screen I saw the word SPLIT in 
the waterfall, I would know I was in 
split. Just having a flashing LED or some 
1/2" x 1/4" high below the power  button 
saying SPLIT is just not enough for me to 
come close to being 100% on this.

I suspect most of the honest answers you'd 
get here says people have made this 
mistake. I'm for an in your face option to 
make it clear when you are in split. Don't 
want it? Don't enable it. Want to be sure? 
enable it...

Gary
KA1J



> The real fix is to just pay attention, and read the screen.
> I spent years in IT where if people just seemed unable to simply read the screen.
> It's the same here with the split, people just need to pay attention to what they're doing.
> 
> 
> 
> 
> 
>      From: Ralph Parker <ve7xf at dccnet.com>
>  To: Elecraft at mailman.qth.net 
>  Sent: Monday, February 23, 2015 3:08 PM
>  Subject: Re: [Elecraft] Split operation
>    
> >> Or, we could replace the *entire* VFO A display with the word "SPLIT"
> during 
> >> key-down. This would be even more obvious, and it wouldn't mess up the
> VFO B 
> >> display. VFO B is what you care about during split TX.
> 
> Why not just have the DVR say "UP, UP" whenever you transmit in split mode.
> Save wear and tear on the KC Kops.
> 
> VE7XF
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hlyingst at yahoo.com
> 
> 
>    
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gary at ka1j.com
> 




---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com